Tel:+86-27-8562 3425
Mobile:+86-180 6203 8202
Quickly find the product you want to know about
Tel:+86-27-8562 3425
Mobile:+86-180 6203 8202
One stop service provider for electrical equipment and engineering
Putting people first, being loyal to the enterprise, and serving society
Xingsheng Tong Electric Group is a high-tech enterprise based in Hubei and radiating throughout the country, focusing on the manufacturing of intelligent power equipment and power engineering services. The group has three core enterprises under its umbrella: Hubei Xingshengtong Electrical Equipment Co., Ltd., Hubei Chengxinda Intelligent Technology Co., Ltd.
35000m2
Factory floor area
2007
The company was established in
5180
Registered Capital
Hubei Province Manufacturing Industry Single Champion
Hubei Province Specialized, Refined, Unique, and New Little Giant
National high-tech enterprise
YB □ -12/0.4 prefabricated substation, used in 10kV ring network power supply, dual power supply or terminal power supply system, as a complete set of equipment for substation, distribution metering, compensation, control and protection. In addition to transformers, the high voltage side of the substation is also equipped with four position (or two position) load switches, backup protection fuses, and plug-in fuses; The low-voltage side can be equipped with control appliances, distribution appliances, compensation devices, and meters according to user requirements. Using transformer oil as insulation and arc extinguishing medium.
GCK (L) low-voltage withdrawable switchgear is suitable for use in power plants, metallurgy and steel rolling, petrochemicals, light industry and textiles, ports and terminals, buildings and hotels as an AC three-phase four wire or five wire system, voltage 400V, 50Hz power system distribution and motor control. The cabinet frame is made of 8MF steel and assembled in combination. Each functional unit is relatively independent, and the propulsion mechanism adopts a lever propulsion mechanism to ensure that the same units can be interchanged and improve power supply reliability.
Dedicated to the design, development, production, and sales of high and low voltage electrical equipment, as well as various sheet metal products; A one-stop service provider for power equipment/engineering that integrates power engineering design, budgeting, and construction general contracting.
The types of charging stations are classified by charging type, mainly divided into AC charging stations and DC charging stations. AC charging stations are generally low current, small in size, flexible in installation, and can be fully charged in 6-8 hours. They are suitable for small passenger electric vehicles and are mostly used in public parking lots, large shopping centers, and community garages. Household charging stations are also mostly AC charging stations. DC charging stations generally have high current, larger charging capacity in a short period of time, larger pile body, and larger occupied area (heat dissipation). DC charging stations are suitable for fast DC charging of electric buses, minibuses, hybrid buses, electric sedans, taxis, construction vehicles, etc.
Schneider's medium voltage authorization cabinet adheres to Schneider Electric's excellent genes and maintains the design concept of MVnex armored metal enclosed switchgear. It has a beautiful and elegant appearance, and is intelligent and reliable internally. It is specially designed for users who need high reliability continuous power supply. MVnex is equipped with more optimized online monitoring, protection, control, and digital systems, as well as high reliability arc protection devices, which can be combined with Schneider Electric's automation and software functions to meet the needs of digital operation and maintenance.
Engineering Presentation
Project Overview: Comprehensive Traffic Management Service Platform for Donghu High tech Zone, Renovation of Intelligent Parking Spaces on Donghu High tech Zone Roads (including detection equipment, signs, markings, signage, and data access to enclosed parking lots), Intelligent Charging Station (including battery swapping stations) System for Donghu High tech Zone Roadside, Donghu High tech Zone Induction Management System, and Supporting Construction of Donghu High tech Zone Static Traffic Remote Operation Command Center, Server and Network Facilities Construction
Contract Content：Implementation content: Civil foundation construction, box transformer design and manufacturing, procurement of charging pile equipment, cable laying and installation, as well as weak current construction such as barrier gates and monitoring.
EPC project for the renovation and upgrading of static transportation (including charging piles) in Donghu High tech Zone
Project Introduction: The project is located in the southwest corner of Yinlian Lake embankment in Wuhan Economic and Technological Development Zone. The main content is to build a new Yinlian Lake embankment pump station, and to dredge and lining some drainage channels. After the completion of the project, the regional drainage standards will be improved to ensure the safety of regional drainage and flood prevention. The total investment of the project is nearly 300 million yuan.
Contract Content：Implementation content:
(1) The new 35kV transmission line starts from the 35kV switchgear of the proposed Wuhan Yinlian Lake pumping station 35kV dedicated substation and ends at the 35kV switchgear of the existing 110kV Dengnan substation. Newly built 7.5km double circuit line, including 1.85km cable length and 5.65km overhead line. Designed with 10mm ice cover. The wire adopts 1× JL/G1A-150/25 steel cored aluminum stranded wire, cable adopts ZC-YJV22-26/35-3× 300mm² Three core power cable, with one 24 core OPGW-10-50-1 optical cable selected as the ground wire.
(2) 19 new double circuit tension rods and 22 new double circuit straight rods will be built.
(3) Create 6Π 200/14 (MPP pipe) cable horizontal directional drilling 405mm, newly built 6&Phe; 200/14+2Φ 100/8 (MPP pipe) cable duct 730m, utilizing cable channel 210m, new construction
13 cable straight wells, 1 new cable joint well, and 6 new cable fences.
Wuhan Yinlian Lake Embankment Pump Station New 35KV Special Substation Project and 35KV Supporting Line Project
Friction No.1 Brake Technology (Xiantao) Co., Ltd. is located in Xiantao Industrial Park, with three factory areas covering an area of 750 acres and a building area of 185000 square meters.
Contract Content：Our company mainly undertakes the EPC of the 110kV substation external construction, station building construction, station equipment design, supply and construction for this project; Turnkey” engineering
Friction No.1 Brake Technology (Xiantao) Co., Ltd
湖北瑞華光電有限公司成立于2021年4月2日，位于湖北省鄂州市葛店開發區。占地面積205畝，總建筑面積27萬平方米， 首期用地68畝。
Contract Content：我公司承擔該項目35KV+10KV(備用)變電站及配電室、發電室變壓器，高、低壓配電柜，直流屏、蓄電池屏、模擬屏、發電機，電纜敷設(不含35KV變電所高壓進線電纜)、橋架、聯絡母線；配套群控系統的采購、安裝及調試，本工程所有供電局交接試驗，安全用具購置，各項手續辦理、通電、驗收以及外線的協調工作。
Hubei Ruihua Optoelectronics Co., Ltd. Phase I Project
The project is located on Shanghai Avenue in Jingzhou Development Zone, Hubei Province, with a total investment of 2.1 billion yuan and a total land area of 1090 acres. It will create a Midea central air conditioning production base, research and development center, and a warehousing and logistics center in Central China.
Contract Content：Our company is responsible for the civil engineering and installation of the 35kV substation and 10kV substation for this project, including the construction of switch stations, distribution rooms, high and low voltage complete equipment and installation, and power on commissioning.
Hubei Midea Building Technology Co., Ltd. Phase I Project
Hubei Rongtong High tech Advanced Materials Co., Ltd. is located in Daye, Hubei Province. It is a leading innovative enterprise in lithium battery basic materials in China. The company was established in October 2016 with a registered capital of 330 million yuan, covering an area of approximately 480 acres and a total investment of 3 billion yuan. The construction was completed in three phases.
Contract Content：Our company is responsible for the general contracting project of the 10kV power distribution system in the factory building, including the supply, installation, and commissioning of complete sets of high and low voltage equipment for power transformation and distribution.
Hubei Rongtong High tech Advanced Materials Co., Ltd. Project
Adhering to the principle of "customer first, quality first, and reputation guarantee", we continuously improve our quality management system
Customer first, quality first
High quality service and reputation guarantee
People oriented and loyal enterprise
Developing electrical services for society
Consultation Hotline:
+86-27-8562 3425
Copyright(C)2026,Hubei Xingshengtong Electrical Equipment Co., Ltd All Rights Reserved. Supported by Toocle 31fabu Copyright Notice 鄂ICP備19030104號-1